| Varumärke | RW Energy |
| Modellnummer | HD2000-serien lågspänningsdesignad frekvensomvandlare (vattenkylt) |
| Nominell frekvens | 50/60Hz |
| Serier | HD |
Översikt
400V, 690V, 1140V, 1380V/160kW~2800kW, och den maximala effekten för parallellmaskinen kan nå 22400kW
Prestandakaraktäristika
Konstruerad tillförlitlighet
Hög redundant kontrollsystem och strömsystem
Vattenkylt uppvärmningsdesign, låg buller och bättre värmeavledning
Fiberförbindelse, starkare störningsresistens
"Blockerad" design
Modulära komponenter, fullständig främre underhåll
Inga specialverktyg krävs, enkel och bekväm underhåll
Intelligent felidentifieringssystem för snabb positionering
Högt anpassningsbar design
Stark nätanpassning, stödjer ett brett inmatningsområde för nätet
Stödjer enskild axel och flera axlar transmission
Utrustad med enhet och enhetskabinetsserier produkter
Stödjer 3 olika rektifieringsmetoder
Stödjer olika kommunikationsprotokoll och encoder-moduler
Utömjordlig kontroll
Anpassad för asynkronmotorer och permanentmagnetiska synkronmotorer
Två kvadrant och fyra kvadrant rektifieringsplaner
Rektifiering, inverter parallell och parallell ström delningsteknik
OLVC och CLVC-kontroll online automatisk växlingsteknik
Mästare-slave synkron kontrollteknik
Belastningsutjämnande kontrollteknik
Kommunikationsprotokoll & smart mjukvara
Stödjer flera kommunikationsprotokoll (Profibus DP, CANopen, Profinet IO, Modbus RTU, Modbus TCP, EtherCAT, EtherNet, ControlNet och DeviceNet)
Ger snabb felsökningsverktyg hopeInsight för att realisera online parameterrättning, statusövervakning, intelligent felregistrering och felidentifiering, etc
Huvudparametrar
project |
Specifications and technical data |
|
Basic rectification |
Input voltage |
4:380V~480V,6:500V~690V |
Input frequency |
(50Hz/60Hz)±6% |
|
Output voltage |
Input Voltage*1.32 (Full Load Condition) |
|
Overload capacity |
Relative base load current IH_DC allows 150% overload for 60s with a maximum current Imax_DC overload 5s, load cycle 300s |
|
Efficiency |
≥99% |
|
Protection function |
Overheating protection, soft rise protection, interlock protection, etc |
|
Intelligent rectification |
Input voltage |
4:380V~480V,6:500V~690V |
Input frequency |
47~63Hz |
|
Output voltage |
Input Voltage*1.3 (Full Load Condition) |
|
Overload capacity |
Relative base load current IH_DC allows 150% overload for 60s with a maximum current Imax_DC overload 5s, load cycle 300s |
|
Efficiency |
≥98.5% |
|
Protection function |
Overheat protection, overcurrent protection, IGBT pass-through protection, etc |
|
PWM rectification |
Input voltage |
4:380V~480V,6:500V~690V,9:1140V,A:1380V |
Input frequency |
47~63Hz |
|
Output voltage |
Input Voltage*1.5 (Rated Condition) |
|
Overload capacity |
Relative base load current IH_DC allows 150% overload for 60s with a maximum current Imax_DC overload 5s, load cycle 300s |
|
Efficiency |
≥98% (including LCL filter unit) |
|
Factor |
Adjustable (factory set to 1) |
|
Protection function |
Over-temperature protection, over-current protection, overload protection, IGBT pass-through protection, etc |
|
Inverse |
Rated input voltage |
4:410Vdc~780Vdc,6:550Vdc~1100Vdc,9:1488Vdc~2200Vdc |
A:1488Vdc~2200Vdc |
||
Output voltage |
0~Rectifier AC input voltage |
|
Output frequency |
0~500Hz |
|
speed regulation range |
V/F:1:50 OLVC:1:200 CLVC:1:1000 |
|
Steady speed accuracy |
OLVC:0.2% ; CLVC:0.01% |
|
Pulsating speed |
OLVC:0.2%; CLVC:0.1% |
|
Start torque |
OLVC:150%(0.5Hz) ; CLVC:200%(0Hz) |
|
Torque control |
V/F: Not supported; OLVC: Support ; CLVC: Yes |
|
Torque accuracy |
OLVC:5% ; CLVC:5% |
|
Torque response time |
OLVC:5ms ; CLVC:5ms |
|
RPM response time |
OLVC:100ms; CLVC:100ms |
|
Dynamic drop equivalent |
OLVC:0.5%*s; CLVC:0.3%*s |
|
environmental conditions |
temperature |
-15°C~+40°C is not degraded, and +40°C~+55°C is degraded |
humidity |
5%~95% non-condensation |
|
elevation |
≤ 4000m, 2000m~4000m reduced use |
|
Mechanical data |
Anti-vibration performance |
Complies with IEC 60721-3-3:2002 |
Protection level |
IP00 / IP20 / IP40 |
|
Safety level |
Meets UL 508C-2004 |
|
Cooling method |
Cold wind, cold water |
|