| Brand | Wone Store |
| Numero ng Modelo | 30kW Micro Francis Turbine Generator 30kW na Micro Francis Turbine Generator |
| Tensyon na Naka-ugali | 400V |
| bilang ng phase | Three-phase |
| Pangako ng Output Power | 50KW |
| Serye | SFW50 |
Ang turbinang Francis ay applicable sa middle at low water head at middle at small flow ng hydroelectric power station. Ang micro hydropower project ay karaniwang gumagamit ng vertical na tipo ng Francis turbine generator system. Ang turbine ay pangunahing binubuo ng spiral case (water diversion chamber), turbine runner o wheel, water guide vane (wicket gates), draft tube, etc.
Ang Francis turbine ay isang uri ng turbine na suitable para sa 20-300 meters na water head at may tiyak na suitable na flow.
Maaari itong hatiin sa vertical at horizontal arrangement. Ang Francis turbine ay may mga advantage na mataas na efficiency, maliit na laki, at reliable na structure.
Ang horizontal na Francis turbine unit, na may horizontal shaft, maaaring magkaroon ng 2 o 3 supports. Karaniwan itong may one stair arrangement. Simple ang structure, mas madali ang operasyon at pag-maintain.
50KW Francis Turbine Engineering Case
Ang Francis Turbine na in-order ng isang French customer ay nai-produce na.
In-order ang equipment noong huling bahagi ng 2018, dahil ang engineering company ng customer ay magkakaroon pa ng iba pang powerful na hydropower projects sa hinaharap, kaya't nagpunta sila ng mag-asawa sa China upang bisitahin ang aming factory, at ibigay ang feedback tungkol sa upcoming na delivery.
Ginawa ng aming engineers ang Francis hydroelectric generating set para sa customer batay sa data ng customer's head at flow
Product Advantages
Komprehensibong processing capacity. Tulad ng 5M CNC VTL OPERATOR, 130 & 150 CNC floor boring machines, constant temperature annealing furnace, planer milling machine, CNC machining center, etc.
Ang designed lifespan ay higit sa 40 taon.
Ino-offer ng Forster ang one time free site service, kung ang customer ay bumili ng tatlong units (capacity ≤100kw) sa loob ng isang taon, o ang total amount ay higit sa 5 units. Kasama sa site service ang inspection ng equipments, checking ng new site, installation, at training sa maintenance, etc.
Tanggap ang OEM.
CNC machining, dynamic balance tested, at isothermal annealing processed, NDT test.
Design at R&D Capabilities, 13 senior engineers na may karanasan sa design at research.
Specifications
| Rated Head | 20(meters) |
| Rated Flow | 0.5m3/s |
| Efficiency | 85(%) |
| Pipe Diameter | 200(mm) |
| Output | 30(kW) |
| Voltage | 400(V) |
| Current | 75(A) |
| Frequency | 50(Hz) |
| Rotary Speed | 1500(RPM) |
| Phase | Three(Phase) |
| Altitude | ≤3000(meters) |
| Protection Grade | IP44 |
| Temperature | -25~+50℃ |
| Relative Humidity | ≤90% |
| Safety Protection | Short circuit Protection |
| Insulation Protection | |
| Over Load Protection | |
| Grounding Fault Protection | |
| Packing Material | Woodenbox |