Wysoko wydajny kontroler wiatrowo-słoneczny 100-600W

Rated input power

300W

400W

600W

600W

Rated input voltage

14Vdc

14Vdc

28Vdc

48Vdc

Input voltage range

0~16Vdc

0~16Vdc

0~32Vdc

0~64Vdc

Rated input Current

25A

34A

25A

13A

Brake by hand

Press button "Enter" "Esc" at the same time to unload completely. Then recover by hand.

Brake by over current

25A (factory default,
0~25A settable)Unload completely when reached the set current, and recover automatically after working 10mins.

34A (factory default,
0~34A settable)Unload completely when reached the set current, and recover automatically after working 10mins.

25A (factory default,
0~25A settable)Unload completely when reached the set current, and recover automatically after working 10mins.

13A (factory default,
0~13A settable)Unload completely when reached the set current, and recover automatically after working 10mins.

Brake by overvoltage

Refer to "output overvoltage" control

Brake by over wind speed (optional)

14m/s (0 - 30m/s settable), Unload completely when reached the set wind speed, and recover automatically after working 10mins.

Brake by over rotational Speed (optional)

500r/min (factory default, 0 - 1000r/min settable)  Unload completely when reached the set rotational speed, and recover automatically after working 10mins.

PV Input Parameters

Rated input power

150W

300W

Max. open circuit voltage

24V

48V

96V

Rated input current

13A

7A

Reversed connection protection

YES

Charge Parameters

Rated battery Voltage

12V

24V

Temperature compensation function (optional)

-3mV/°C/2V

Output Parameters

Rated output voltage

12V

24V

48V

Start unload voltage

13.5V (factory default, 11Vdc~16Vdc settable)

27V (factory default, 22Vdc~32Vdc settable)

58V (factory default, 44Vdc~64Vdc settable)

Complete unload voltage

14.5V (factory default, add 1V to the start unload voltage)

29V (factory default, add 2V to the start unload voltage)

52.8V (factory default, add 5.2V to the start unload voltage)

Max. Output current

25A

34A

25A

13A

DC load output

Output loops

2 loops

Output control mode

2 loops could be set in 7 modes, such as light control on&off, light control on and time control

Output voltage range

10.8V~16V

21.6V~32V

43.2V~64V

Undervoltage recovery point

Refer to "rated battery voltage"

Rated output current

10A/each loop

Overload protection

120% rated DC output - 1min, 150% rated DC output - 10s

Short circuit protection

200% rated DC output, instant protection

General Parameters

Rectifier mode

Uncontrolled rectifier

Display mode

LCD

Display information

Battery voltage, wind turbine voltage/current/ power, PV power/voltage/current, light control-on voltage, light control-off voltage, time control duration, load current and so on.

Monitoring mode (optional)

RS232/RS485/RJ45/GPRS/Bluetooth/Zigbee

Monitoring Contents

Real-time display: Battery voltage, wind turbine voltage/current/ power, PV power voltage/current, wind power generation capacity, solar power generation capacity, Battery status, wind turbine status, day and night, DC overload, DC load short circuit, and so on.

Parameter setting：
Output overvoltage point, wind turbine over current point, wind turbine start voltage DC load overvoltage/undervoltage/undervoltage recovery point, output mode choice for two loops, light control on voltage, light control off voltage, and wind turbine brake settings.

Lightning protection

YES

Conversion efficiency

≤95%

Static loss

< 0.5W

Ambient temperature

-20°C ~ +40°C

Humidity

0~90%, No condensing

Noise

≤65dB

cooling mode

natural cooling

Installation mode

Wall-mounted

Cover protection class

IP52

Product dimension (WHD)

150x143x83mm

150x205x28mm

Product net weight

1.8kg

2.8kg

Note: Part of parameters can be adjusted according to customer' specific demand