Makafofin Yanzu: Tashin Kwaikwayon Teknologi na Solid-State Transformer a Amurka

DG Matrix da Resilient Power sunan cewa aikin haɗin kwaƙi na gida suka ƙara ci gaba, lokaci, da kuma yadda ake yi wajen bayar zama zuwa data centers, magangan yanayin (EV) charging hubs, da kuma wasu. Daga baya biyu, masana'antu mai siffar kwarewa suna neman aiki da ya fi iya canzawa aikinsu daban-daban, battery systems, da kuma generators na gida zuwa zama mai sauƙi kamar EV chargers ko kuma servers na data center ba tare da aiki da kayan aiki mai sauƙi don hakan.

A nan, waɗannan aikin da ake kira solid - state transformers suna faru a kan kasuwanci — da kuma wannan shiga ba tare da lokacin da ya fi kyau.

Wannan shine saboda wannan fasahar zama ita ce mafi girma a kan data centers, factories, da kuma EV charging hubs, wanda ke zama lafiya a kan grid ta kwarewa da kuma za ka tsaftace utilities suka yi aiki da kayan aiki mai sauƙi don taimaka ga global warming.

Yanzu, abubuwan da suka yi zama mai sauƙi a kan electricity an fito da supply capacity ta U.S. power grid. Ta hohoni, wannan matsala zai iya lada ne ta hanyar aɓɓa suka yi aiki da solar panels, batteries, da kuma generators na gida — ideally microgrids — amma wannan shirin da ya fi kyau ba tare da aiki da ya fi kyau da kuma ciki mai sauƙi don hakan.

Koɗar, har da aikin da battery, fuel cell, generator, ko kuma wasu aikin na gida suka buƙata kayan aiki daban-daban — electrical protection devices, isolation transformers, step - up and step - down transformers, power converters — don cin karamin zama mai sauƙi (DC) zuwa zama mai sauƙi (AC) ko kuma a nan, da kuma karɓe ko karamin voltage don taimaka ga abubuwan da ke buƙata tsari a kan building.

Solid - state transformers suna iya samun duk waɗannan abubuwa da aikin da dama, da kuma cin karamin zama kamar yadda router yana cin karamin data flow. Wannan shine mafi girma wajen taimaka ga high - power - demand equipment (kamar EV chargers) ko kuma equipment da suka buƙata ma'ana ga power quality (kamar server racks na data centers).

Suna cewa Haroon Inam, CEO and co - founder of DG Matrix. DG Matrix shine kadan daga cikin companies da suka faru wajen samun solid - state transformers zuwa practical use. An cewa DG Matrix ta kafa $20 million a ranar Marsa a shekarar idan, da kuma a nan suka yi aiki wajen ban da factory a North Carolina, wanda ana fuskantar aiki later this year with an annual production capacity of 1,000 units. "We are entering the huge and underserved commercial and industrial microgrid market," he said. "People haven't done this because the cost of building a single, custom microgrid is too high."

DG Matrix ba kawai company da ke yi wannan. Heron Power, startup da aka kafa shi a cikin former Tesla employee Drew Baglino, ta kafa $43 million and aims to build its first solid - state transformers by 2027. Amperesand ta kafa $12.5 million last year to continue developing solid - state transformers that are being tested on Singapore's power grid.

Companies da suka yi aiki a kan electronics suna neman wannan. Electrical equipment giant Eaton agreed last month to acquire Resilient Power Systems, which raised $5 million in 2021 to build and deploy its power conversion equipment for EV charging hubs and other high - energy - consuming environments. Eaton will invest $55 million in the company at the closing of the transaction; depending on Resilient Power's financial and technical performance in the next few years, Eaton may also pay an additional $95 million.

"A lot of people have been working on this technology for more than a decade," said Aidan Graham, senior vice president and general manager of Eaton's Critical Power Solutions business. Now, with advances in several key engineering technologies, this technology may finally be having its golden age — utilities and other institutions have begun to test it.

Evolution of Solid - State Transformers

Eaton has been working on solid - state transformer research and development for many years. The company has not yet disclosed how to scale up the manufacturing and deployment of Resilient Power's technology. But Graham said: "We are exploring several areas, including EV charging and integrating batteries into data centers and other critical environments. 'The loss of power for even a moment can threaten people's lives and cost a lot of money.'"

Michael Wood III, chief of staff at DG Matrix, said the company is testing its equipment with companies including electrical equipment manufacturing giant ABB, North Carolina utility Duke Energy, and PowerSecure, a large microgrid and data center power system developer owned by utility Southern Co.

"The best way to get the next gigawatt of energy is to build distributed systems," Wood said. "Today, you need all these devices to make these projects work smoothly. DG Matrix eliminates the balance between all these systems and simplifies it into a single system."

Inam said the cost of using DG Matrix's solid - state transformer is only half of that of connecting typical on - site microgrid components using a combination of multiple technical standards. In addition, it makes it easier to quickly mix and match equipment or change the system configuration of data centers, EV charging hubs, and other potential microgrid sites.

So if solid - state transformers are such a useful technology, why are they only entering the field now?

There is a good reason it has taken so long, said Vlatko Vlatkovic, a partner at Clean Energy Ventures, a DG Matrix investor and a veteran of General Electric's industrial electrification business who joined the startup's board this year.

The power grid relies heavily on electromechanical devices that operate relatively simply and have changed little over the past century. Despite some progress in recent years that has made devices such as solar inverters or EV drive systems possible, the semiconductors that make modern computing possible have not been widely used in the power grid.

"Pushing the industry to use more power electronics has been a huge challenge," Vlatkovic said, especially at higher grid voltages. Until recently, the underlying technology "was not large enough or reliable enough. There were technical problems."

Similar challenges have plagued solid - state transformers in high - voltage industrial applications, said Neal Dikeman, a partner at Energy Transition Ventures, an investor in Resilient Power. He said continued advances in silicon carbide semiconductors and improvements in the computing power needed to make them efficient at power conversion have helped. "But it's not easy."

Inam, who served as chief technology officer of grid power control provider Smart Wires before joining DG Matrix in 2023, noted that the startup had to solve several key challenges to get to this point.

First, at high voltages, the heat generated by AC - DC conversion is difficult to dissipate. Handling "electromagnetic noise," or interference caused by the same high - frequency electrical switching. "If you don't know how to effectively mitigate the noise, it affects everything. It can cause overheating, explosions, and performance degradation," Inam said.

However, solving these challenges also has its rewards. "Our technology is now mature and sophisticated enough that we can launch reliable equipment," Vlatkovic said.

Why Now Is the Time for Solid - State Transformers

The timing couldn't be better.

"Everything is electrifying, from cars to industry to housing," Vlatkovic said. "If you look at projections of the power the grid will need to deliver over the next 10 to 20 years, you'll see that we need to at least double grid capacity. Some projections even say we need to triple existing capacity."

Inam said meeting the power demands of data centers is a particularly big opportunity.

The ambitious artificial intelligence plans of tech giants are placing a huge burden on the power grids of utilities in data center hotspots such as Virginia, Georgia, and Texas. This has prompted data center developers to explore ways to reduce the pressure on the power grid, including building generators and batteries nearby or on - site.

"The three big problems are the speed of power supply (customers can't get power fast enough), the cost of power, and the ability to aggregate multiple resources for flexibility," Inam said. "We've talked to enterprise customers with hundreds or thousands of sites. The biggest challenge they face is having to design each site from scratch. They're looking for a turnkey solution to the challenge of deploying 1,000 sites instead of one."

Solid - state transformers can help meet these needs, Vlatkovic said. "From complex installations and multiple companies to one company taking care of everything."

Putting More Functions into Smaller Packages

Graham of Eaton said that "high - power - density" packaging can also save valuable space in tight environments such as data centers and EV charging stations. Solid - state transformers can be mass - produced in factories, reducing the cost and time of electrical labor at construction sites. "You've brought it back into a controlled manufacturing environment," Graham said.

In addition, having a single device that can perform multiple tasks simplifies engineering requirements, Dickman said.

"If you design a complex system using off - the - shelf components, the mismatch of different devices can't fully meet the system's requirements. This increases costs and reduces efficiency," he said. "You can solve this problem with custom products — but that's more expensive and riskier. When you're dealing with solar, energy storage, and data centers, and people who need to move quickly and need something reliable and cheap, all of this falls apart."

Joaquin Aguerre, the company's director of strategic portfolio development, said all these potential advantages have prompted microgrid developer PowerSecure to launch pilots of at least two solid - state transformer technologies, including tests in collaboration with DG Matrix. "We're trying to be at the forefront of this technology."

PowerSecure has designed and installed more than 2.4 gigawatts of microgrid capacity for customers ranging from large retailers and hospitals to utilities and data centers. The company is particularly focused on solid - state transformers to integrate energy - efficient "hybrid microgrids" that combine "solar, energy storage, natural gas generators, fuel cells, EV charging — whatever you can think of," Aguerre said.

"The real market demand has started to emerge," he said. At the same time, "most of these companies are still in the early stages.... The next logical step is to conduct appropriate pilot projects to observe real customer use cases on a smaller scale" and test the durability and reliability of the relevant technologies.

After all, no matter what disadvantages traditional transformers have compared with cutting - edge power electronics, "they don't fail often," Aguerre pointed out. "Everyone expects the same reliability from whatever solid - state transformer they're looking at."