| Brand | RW Energy |
| Numero ng Modelo | APView500 analizer ng lakas |
| Larawan na Pagsasahimpapawid | 50/60Hz |
| Serye | APView |
Pangkalahatan
Ang Power quality monitor APView500 ay naglalaman ng high-performance multi-core platform at embedded operating system, at nagsasagawa ng pag-monitor sa mga power quality indexes na ipinahayag sa IEC61000-4-30 Testing and measurement techniques –Power quality measurement methods, at nagbibigay ng iba't ibang mga function tulad ng harmonic analysis, waveform sampling, voltage dips/swells/interruptions monitoring, flicker monitoring, voltage unbalance monitoring, event recording, at measurement control. Ito ay sumasaklaw sa IEC 61000-4-30 Class A Edition 3.1 sa pamamagitan ng standardization ng mga paraan ng pagsukat ng power quality index, accuracy ng pagsukat ng mga parameter, clock synchronization, event alarms, at iba pa, at sumasatisfy ang mga demand ng power quality monitoring ng power supply system hanggang 110kV. Kaya, ito ay malawakang applicable para sa power quality monitoring sa chemical industry, steel industry, metallurgy industry, hospitals, data centers, transportation, construction industry, at iba pang industriya.
Mga Parameter

Technical Datasheet
Technical Parameter |
Halaga |
Rated Value |
AC voltage: AC/DC220V, AC/DC110V o DC48V AC current: AC1A, 5A; |
Overload capacity |
1.2In, continuous working 20 beses para sa 1 segundo
|
power supply |
Rated: AC/DC220, AC/DC110V o DC48V Permissible deviation: -20%-+20% Power consumption:≤15W |
Power Consumption |
≤0.5VA (single phase) |
Measuring range |
0-1.2In |
Digital output |
Mechanical service life: ≥10000 Output mode: Passive contacts Switching capacity: ≤4000W o ≤384VA On-state current: ≥16A(AC250V/DC24V) sa continuous mode; ≥30A para sa short term (200ms)
|
Accuracy |
Class 0.5 |
RMS Voltage: ±0.1% RMS Current: ±0.1% P,Q,S: ±0.2% Power factor: Class 0.5 Voltage deviation: 0.1% Frequency deviation: ±0.001Hz
|
|
Communication |
RS485, Modbus-RTU protocol; Ethernet. |
Three phase unbalance |
Voltage unbalance: ±0.15% Current unbalance: ±1% |
Power frequency withstand voltage |
Between power supply set of terminals and signal input, output set of terminals 2kV/1min (RMS) Between the shell and all set of terminals (except the set of terminals reference voltage less than 40V) AC 4kV |
Temperature |
Operation: -10℃~+55℃ Storage: -30℃-+80℃ |
Humidity |
≤95%RH, no condensation, without corrosive gas |
Altitude |
≤ 2500m |
Dimension

Installation

Wiring

Network
